ERT Electronics & Radio Today Students working with radio equipment
  YOU ARE HERE:   Home   >>   Analogue Circuits  :  >> this article image SITE MAP | SEARCH SITE image  
 
image

Home


Basic concepts


Circuits - analogue


Electronic components


Radio


Ham radio


Constructional
techniques


Testing and test equipment


Links


Bookshop

 

Related articles

Power supply electronics overview

AC rectifier circuits

Voltage regulator circuits

Zener voltage regulator circuit

7805, 7812, and 78** series regulators

Specifications (specs)



Latest added and updated pages

What is the Morse code?

Morse keys and keyers

Hints and tips on buying used ham radio equipment

Ham radio shacks

Ham radio call signs

Soldering and how to solder (includes video)

Zener Voltage Regulator Circuit

- an overview of the basics of the zener diode regulator circuits and the way in which a zener diode can be used to provide a reference voltage in an electronics power supply.

The very simplest of voltage regulator circuits can be created using a simple series resistor and a zener diode. This is a shunt regulator circuit, and it consists of a series resistor with a zener diode connected down to ground, across the load.

Zener voltage regulator circuits are normally used for low power applications where only a reasonable level of stabilisation is required. A zener diode circuit will be able to provide a reasonable level of stabilisation, but for more exacting requirements a more sophisticated circuit is required.


Basics

The zener diode operates under reverse bias. As the voltage increases across the diode, it does not conduct at first. However when the voltage reaches a certain level, the diode starts to conduct, and it will try to maintain the same voltage across the diode for almost all levels of current. In this way, if a load is placed across the zener diode, in the simple regulator circuit the voltage will be maintained despite and variations in the current requirements for the load. The zener diode will take up the variations in current required to keep the voltage across the diode the same.

Obviously the zener diode cannot accommodate an infinite variation of current. There is a minimum level of current it must carry to maintain the voltage, and if too much current is taken, then it will overheat, and could be destroyed. When designing a simple regulator circuit, it is necessary to design the circuit to accommodate the likely variations.

 


Active Filter Cookbook

Don Lancaster


Active Filter Cookbook

amazon

.co.uk

.com


 
 


 

HOME | SITE MAP | SEARCH SITE | TOPTop of page
All information on the site is copyright ©. The site is run by Ian Poole of Adrio Communications Ltd | Please feel free to add links to this site - no permission is required